The MB10F is an ultra-thin chip bridge rectifier that uses the single-phase conductive characteristics of a diode to convert AC to DC.The device is designed for small devices,low power application circuits,and is ideal for stylish electronic product designs.
The MB10F has the same solder pins as the MB6S and can be directly replaced without the need to change the PCB board.It is therefore a great help to the miniaturised high current product manufacturing industry and is ideal for portable application designs that save board space.Passivated Bridge Rectifiers
Passivated bridge rectifiers are ideal for automatic placement and feature reliable low-cost construction using precise plastic moulding technology.In power supplies,bridge rectifiers are used to provide the necessary DC voltage to electronic components or devices.
Specifications
Manufacturer:Diodes
Product Category:Bridge Rectifiers
Type:Single Phase Bridge
Mounting type:SMD/SMD
Package/Carton:MBF-4
Package Material:Plastic/Epoxy
Vf-forward current:800 mA
Peak reverse voltage:1000 volts
Vf-forward voltage:0.94V
Maximum surge current:30A
Minimum operating temperature:-55℃
Maximum operating temperature:+150°C
Number of phases:1
Length:4.95mm
Width:4.1mm
Height:1.6 mm
Series:MB10
Ir-reverse current:0.2µA
Product Category:Bridge Rectifiers
Vr-reverse voltage:1000 volts
Diode Element Material:Silicon
Terminal position:Double
Functional characteristics
U/L flammability classification of 94V-O for plastic materials
High surge overload rating:35A peak
Saves printed circuit board space
Guaranteed high temperature soldering:260°C/10 seconds/5 lbs.(2.3kg)pull force
Terminals:Plated leads solderable per MIL-STD-750,Method 2026
Housing:moulded plastic body on passivated connector
Polarity:Polarity symbols marked on body dimensions in inches and(millimeters)
Housing Material:Moulded plastic.UL Flammability Classification Grade 94V-0
Moisture sensitivity:J-STD-020 Class 1
Terminals:Lead-free plating(matte tin finish).Solderable according to MIL-STD-202,Method 208
Weight:0.08 g(approx.)
Pin Layout
Pin Size
Marking information
Main Applications
The MB10F is a surface mount glass passivated bridge rectifier with a maximum peak reverse voltage of 1000 volts and an average output current of 0.8 amps.The MB10F devices are suitable for AC to DC bridge full wave rectification in SMPS,LED lighting,adapters,battery chargers,home appliances,office equipment and telecom applications.
Note:Check the parameters and pinout of the MB10Fs before replacing them in your circuit.